TMIS Dimensions & Mounting Instructions
From Zenitel Wiki
| Dimensions (WxHxD) | Flushmounted (WxHxD) | Weight | |
| TMIS-1 | 117 x 117 x 39 mm | 117 x 117 x 5.5 mm | 0.3 kg |
| TMIS-2 | 114 x 147 x 58 mm | -- | 0.5 kg |
| TMIS-4 | 117 x 117 x 41.4 mm | 117 x 117 x 7.6 mm | 0.3 kg |
| TMIV-1+ | 117 x 117 x 43.5 mm | 117 x 117 x 8.5 mm | 0.3 kg |
Contents
TMIS Station Dimensions
Onwall Surface Mounting
On-Wall Surface Mount Back Box - TA-12 or TA-13 to be used.
Flush Mounting
Flush Mount 2-Gang Back Box - TA-2 or TA-3 to be used
Note! It is recommended to utilize back boxes with weep holes at the bottom
Flush Mounting Procedure
- 1. Mount the 2-gang back box into the wall
- –Plug the Ethernet cable into the RJ-45 port on the station
- 2. Fasten the TMIx-x intercom to the back box with four #6-32 UNC countersunk-head screws
|
To attain the rated ingress protection of IP44, flush mounting of TMIV-1+ must only be done on a surface that is completely planar, smooth, and clean.
Any surface irregularities must not exceed 0.5 mm. If this is not achievable in a reliable manner, appropriate sealant or filler should be applied to seal the gap between the station and the wall. Optionally, the on-wall back box TA-32 could be used. |